How to select a cut off machine

When buying a cut off machine not only depends on the product, the most important thing is to choose a good manufacturer. In the market, there are many manufacturers of cut off machines, a variety of what kind of publicity, what kind of are, all say their products are good. In fact, in the process of looking at themselves, different manufacturers produce cut off machine equipment quality is not the same. Next is the introduction of cut off machine selection skills.

Here is the content list:

Roughness

Perpendicularity

Cut grain and burr

Choose the merchant

Roughness

The cross-section of the heavy duty cut off machine will form vertical lines, the depth of the lines determines the roughness of the cutting surface, the shallower the lines, the smoother the cutting cross-section will be. Roughness affects not only the appearance of the finished product but also the degree of friction. In most cases, it is necessary to reduce the grain depth of the cut section. The smoother the surface, the better the result.

Perpendicularity

If the thickness of the cutting board is more than 10 mm, the perpendicularity of the cutting edge is very important. During the cutting process, the laser head moves from far to near and from top to bottom, and the focused beam is scattered farther. The closer the laser head is to the target, the more focused the beam becomes. During this process, vertical deviation occurs. The smaller the vertical deviation, the better the performance of the precision cut off machine.

Cut grain and burr

As we all know, compared with other processing equipment, the automatic cut off machine has the advantages of small burr, fast efficiency, and high precision. When processing thick plates in the cut off machine, the molten metal residue will not appear on the vertical cutting surface but will appear at the bottom of the incline, which results in the gas not being able to completely blow out the hanging residue when the slag is blown, and after cooling, cutting hanging residue and burrs are formed. To correct this problem, the speed is generally reduced at the end of cutting to minimize slag and burrs. So, the fewer burrs and slagging when cutting medium-thick plates, the better the machine quality.

Choose the merchant

As the so-called comparison of goods, it is not without reason, before the purchase of the CNC cut off machines to run often, ask other people's purchase, choose a few manufacturers who think they have a reputation after the door-to-door approach or go to the market to see their goods, it is best to make a record. Selling good is not necessarily good quality, you must choose the right product for you. Then contact the manufacturer to see the goods, to see if it is consistent with the market cut off machine equipment. Here we should pay attention to those who "hit a gun for a place" manufacturers, these manufacturers are not very large, we must be careful in the process of looking, careful, think twice before you buy the preferred cut off machine products. Good quality cut off machine, the role played in the work is still very large, on the one hand, the quality of the product can meet the requirements of the production efficiency has been greatly improved. On the other hand, the safety of the operator has a great guarantee that the project is important, safe, or in the first place.

Liaocheng Ray Fine Technology Co., Ltd. is a professional laser marking machine supplier. Our company has a professional R&D team and professional after Our company has a professional R&D team and professional after-sales service, so you can buy our cut off machine products without any worries.