Views: 77 Author: Qingdao Kaituo-nc Equipment Co., Ltd Publish Time: 2020-09-29 Origin: https://www.jeeleng.com/
Cut off machine may have heard of, but about the specific installation process of the cut off machine, many people are not very clear, as a large manufacturer of cut off machinery, we are very comprehensive knowledge of this type, this article on the installation of cut off machine notes and maintenance methods to give you a detailed explanation.
Here is the content list:
Installation methods
Maintenance methods
Installation methods
In the installation of the precision cut off machine, it must be carefully studied on its installation site, must ensure that the installation is relatively flat, and relatively solid ground. Because its weight is very heavy, if it is not smoothly placed in a relatively flat place, then their work is not very stable, long-time use will have a great impact on the cutter, and will affect its service life. And if it cannot be placed on solid ground, then due to its weight, will cause the cutter to fall, the same will also have a certain impact on the use of the effect.
In the installation of the load-bearing frame, must be installed by the corresponding steps, that is, the load-bearing frame above the center of the trough, aligned with the corresponding guide barrel and straightening barrel, etc., these holes must not be installed wrong or hit the opposite, which will affect the normal work of machinery.
In the installation of the CNC cut off machine, you also need to keep the entire machinery smooth, to ensure that its internal structure is also smooth, and after installation, you also need to check the corresponding wiring, to see if all the wiring is normal, there are no parts of the damage, and then test run, and only after completing such a process, can be used in the next time, and if there is any damage, it must be rechecked after repair, must ensure that the cutter is installed correctly, to ensure that there is no danger of any in the use of the time.
Maintenance methods
After the operation of the rotary cut off machine should be cleared of debris under the tool and tool to keep the cutter neat. Also, check the tightness of each bolt and triangle tape, adjust the gap of the movable blade, and replace the blunt blade. Every half month the cut off machine needs to be maintained, check the degree of wear of gears and bearings, and adjust the clearance of various parts. According to the regulations, the eccentric shaft of the cut off machine, sliding bearings, motor bearings, connecting rod cover, and tools with calcium-based grease lubrication.
As one of the automatic cut off machine manufacturers, Qingdao Kaituo-nc Equipment Co., Ltd hope you can read the above installation steps carefully. The correct installation of cut off machine is also the correct use of cut off machine steps, not only for safety reasons but also for the long life of our machine. Probably the installation process is this way, I hope it works for you!
